Category: hobby potter weekly

Episode 4 – Kiln Opening Tests – Success in Failures

Episode 4 – Kiln Opening Tests – Success in Failures

This was a wonderful growth week! I spent this week in both brainstorming and testing!

First, this Weeks Video:
2016 Hobby Potter Weekly – Season 2 – Episode #3 (8-6-16):
( I ramble a little in the journal section so you may just want to read the blog LOL !)

– Kiln Testing: I always love the element of testing that happens in ceramics and combine with that the element of the unknown that comes with every kiln run! It’s exciting yet disappointing when things don’t work out. Thankfully there was nothing I was making “on purpose” in the kiln and just accept the failed tests as just that… growth for future successes!

Challenge #1: Glaze Application: The incense burners did not turn out as I was anticipating.  I believe the challenge occurred with the layers and application thicknesses. Under the wash under the flowers was too thin and the colored glaze applied to the top was too thick.

Challenge #2; White turned out beige: Wrong Clay! I also wanted to test what my clear glaze looked like on the earthenware clay. Since I was after pure white results for the future wedding cake and bridal shower favors. I call this a successful test, even though my clay did not turn out white! It would have been a disaster if I created 180 wedding favors and they turned out a yellowish beige!

-Planning The Ceramic Wedding Favor Cake : Since my daughter and soon to be son-in-law wanted something other than a traditional wedding cake, we thought it would be fun to combine the wedding favor as part of the cake! So I’m constructing 180 ceramic pieces to hold a “dessert” that will be displayed in the shape of a wedding cake that guests will be able to take home with them! This week was the beginning stages.

The challenge was determining how much space and what size I would need for the cake form to work out. A rough “guess-timate” I came up with was approximately 120 pieces sitting on a the round table and 60 pieces on the second tier and the third tier will be their personal sized wedding cake to cut (for traditions sake). In the coming weeks we’ll see how this all pans out in actual fact LOL!!!

20160808_112202

-New Clay! : After the clay party and seeing my above test results, I was able to talk to Sandra Veneman (Ceramic artist & Co-Owner of The Chartreuse Muse Art Gallery), about a finding a pure white clay. She recommend the clay and clear glaze they use. Amaco’s Versa Clay & Duncan’s Pure Brilliance. It is an earthenware clay, but can be fired up to Cone 5. I just now read the description and it says it’s made for children in the classroom…so their must be something very forgiving about it. Went out, bought the clay and started to throw with it to make the Bridal Shower favor cups….LOVE IT!!! Let’s see if it really comes out white!

20160812_113223

-Just for fun! : I took some time off camera and made a few pieces just for the fun of it! After all …I’m a “hobby potter” and as a hobbyist we are all free to do what we want with our hobby! A small sculpture pitcher and a sushi tray!

20160808_213825

And with this I’ll close! Hope you enjoyed the video and will see you next time!

Enjoy your clay play!!!

~ Tammy Jo

Episode 3 – It’s A Clay Party! – Back In the Studio…Trimming Bowls & Lots of Wash Glazing

Episode 3 – It’s A Clay Party! – Back In the Studio…Trimming Bowls & Lots of Wash Glazing

Back for another week inside & outside the pottery studio and I’m journaling my projects, progress and learning experiences (both the good & bad)!

This Weeks Video
2016 Hobby Potter Weekly – Season 2 – Episode #3 (8-6-16):

– A Clay Party! : The week started of great as I ventured outside my studio for a fun ceramic adventure at the “Chartreuse Muse Art Gallery” in Modesto, CA. I celebrated the birthday of my artist friend Nicole Slater, along with her girlfriends, by enjoying a class on building luminaries (wonderfully taught by Ceramic Artist & Co-Owner of the gallery Sandra Veneman)!  Being surrounded by other people all chatting and playing with clay together was definitely  a new exciting experience! I got so immersed in what other people were making I actually forgot to get a posterity photo of what I made(I’ll share it when it’s finished! 🙂  I learned a new perspective on hand-building cylinders and loved the fact I had to get creative without all my usual studio tools!  I’d recommend it for everyone!

20160801_140658

 

On the Wheel – Trimming & Marble Textures:  The bowls made in last week’s episode needed a trim, so I jumped on the pottery wheel to finish things up. They did get a little more dry than I like, but was still able to trim. This brown stoneware reclaimed clay is amazing for special effects! Because it was reclaimed using remnants of the previously pugged white stoneware and also had some sculpture clay thrown in, the trimming results are always unique. With the added chunks of white clay, it trims out to an interesting marbled texture. Sadly it’s 15 pound away from extinction as I’ve run out and there is no way to recreate this formula exactly. Thankful and excited about these bowls.

20160802_155112

 

–  Glazing & Testing: Opened the bisque load of projects worked on in past episodes. The pieces were low fired (bisque fired) to Cone 04 in my Skutt Kiln – KM1018.

Hobby Potter Weekly - Episode 3 20160804_151024

Actually, If I look at the pieces and glaze work….everything is TESTING. The incense burners and small bowls were a test, the glaze work (combinations of colors and the different wash effects)…were also all tests! I can’t wait to see what new things I’ll learn from the next kiln opening!  Note to self: “Tammy Jo, you need to grind and reapply kiln wash to your shelves…they need some T.L.C (Tender Loving Care)!”

Thanks for watching and please feel free to comment, I’d be happy to hear from you!

Enjoy the clay!

Tammy Jo

 

Web: http://hobbypotter.com

Blog: http://hobbypotter.com/blog/

Shop: http://etsy.com/shop/HobbyPotter

Instagram: http://instagram/hobbypotter

Facebook: http://facebook.com/TammyJoHobbyPotter

Bowls – Burners & Tools …Contemplating “Tiny” – Hobby Potter Weekly – S2 Episode 2

Bowls – Burners & Tools …Contemplating “Tiny” – Hobby Potter Weekly – S2 Episode 2

It’s summer in my town…and boy has it been hot! Here is the second installment in the Hobby Potter Weekly video series for 2016! Catch you at the end for some additional thoughts!

Hobby Potter Weekly Season 2 Episode 2:

In This Episode:
– Changing My Throwing Technique to Ease Pain

I’m making adjustments as I throw on the wheel to help ease some arthritic finger pain.  It may not be the ideal way to throw *so find a pro potter if you want proper technique instructions* , but if I can make these little changes work for my new situation…I’m going to happily continue on with them! There were a couple things I first tried this week that really helped…

  • Soft Clay / Wet Clay – I initially started trying out my wheel again with earthenware, but realized it was not in the softest state so switched to the  brown stoneware. Huge difference! The goal now is to keep all my clay this soft!. Since this overly wet clay is unfamiliar, it may be a little more challenging to throw. so I’ll need to adjust my pressure to avoid it imploding while throwing!
  •  Sponge it! I learned to use my knuckle for pulling up walls on the wheel, which for now is a big ouch! So for some added cushion and support I’m using the sponge. Snapshot - 1What I found out was the sponge will also absorb some of the water from the super wet clay firming it up and making it more stable…what a perk! Of course, I’ll be re-learning my hand pressure because for some reason less pressure is needed when using the sponge. I’ll keep trying until I get the feel of a smooth throw. I LOVE the pottery wheel!
Tool of the Week:

I thought it would be fun to share a tool that has drawn the most interest and attention over the last 5 years of publishing videos. It’s extremely expensive and can only be purchased through high quality stores….NOT!

Snapshot - 2

The Tool…A 20 “something” year old Fun Factory Playdough Extruder Toy!
The coils are great for cup handles, feet or anything you would use a small coil for, but don’t want to go through the hassle of whipping out a large extruder! It’s very convenient and the clean up is easy. It’s a keeper!

– Handbuilding – Working Small & Making Table Time More Efficient:

Snapshot - 3I’m trying to think of ways to streamline processes. To keep the clay off rollers and minimize unwanted textures, I decided to invest in some smooth textured fabric for a more clean clay surface.

Working Small – This week I started to create “tiny” items for the Modesto Modshop event in November! Something reproduce-able, functional and small that will fit within a 4′ table. Nick Prouse (a Facebook potter friend…thanks buddy) recommended pendants since it’s an Indy market situation. Perfect Idea!!!

20160730_193245 20160730_194525 20160730_193508 20160726_200343

Something I realized about myself, Working larger is more my thing. Maybe because I don’t naturally have a place in my heart for “bling” or jewelry, I was having a challenge “finding the love” and inspiration while making them. Now making the incense burners was a different story! Since this is something I use A LOT of in my country studio it had more meaning (because when they spread that cow manure, I tell ya some intense smells are needed to counteract it !!!). I really felt more inspired to make something both lovely and functional!  They will stay on the Do It Again list because my mind was full of possibilities!

Well that’s it for this week! Please feel free to comment, I’d be happy to hear from you!

Enjoy the clay!
Tammy Jo

Web: http://hobbypotter.com
Blog: http://hobbypotter.com/blog/
Shop: http://etsy.com/shop/HobbyPotter
Instagram: http://instagram/hobbypotter
Facebook: http://facebook.com/TammyJoHobbyPotter

2016 Hobby Potter Weekly – Ep. 1 – Hump Molds – Soul Bowls & Gallery “Attempts”

2016 Hobby Potter Weekly – Ep. 1 – Hump Molds – Soul Bowls & Gallery “Attempts”

Hobby Potter Weekly is back! For the remainder of this year (until December 3rd) I’ll be sharing my weekly thoughts, activities and learning experiences in the studio! Blog posts will include a little more insight to my studio meanderings and also serve as a nice printed retrospect.

This weeks video:

….an over view and extra thoughts…

Making a bisque hump mold from a Ceramic Arts Daily video by Kari Radasch

An exciting side view of making a hump mold from a slab of clay!

 I have been avoiding making these hump molds from plaster for a couple years now. Once I saw the video on Youtube I HAD to give it a try and make my own.

Just when I was beginning to doubt purchasing these large plastic tubes at a yard sale, it really came in handy for this project. Kari uses buckets to make her molds (which I will probably do in the future for larger molds). This hollow tube allowed me to open up the bottom of the tube to allow air from both the top and the bottom. This helped with even drying. Super excited this worked out so well!

Creating “Soul Bowls” – A Texture from Israel! 

20160719_220133

 Words can build, encourage, uplift, inspire or remind us…I wanted to make pretty bowls with inspiring reminders with words that are good for the “soul”!

My beautiful friend Anya and her husband made the trip of a lifetime to Israel! As they traveled to significant landmarks,  she would pick up a piece or wood or rock or seed pod if they had amazing textures. When she returned, she unfolded wonderful stories as she presented me with each special treasure. The texture I chose for these “Soul Bowls” was a conifer seed pod, found in the Garden Tomb area of Jerusalem. These are still in the trial stages as far as finished forms, but are simple and pleasing. I want to fine tune these a little more to see if I can make them a part of my new Amazon Handmade shopping area… (excited to have just received the approval notification a couple days)!

Soul Bowls

Carnegie Art Center – Donation & Art Gallery Submission
(Somethings just do go as planned!)

fishoutofwater rainbowfish 20160722_133549

Trying something new is one of my favorite things to do in the studio. So when I request that the Carnegie Art Center was have a Children’s Literature event to celebrate their 100 Year Anniversary, I was thrilled to donate a piece! They were also having a call to artists for submission for the gallery itself so I thought I’d give it a go! So I picked a couple of books I liked when I was little … “A Fish Out of Water” was a favorite I can still hear my father reading to me and Dr. Seuss and I are like kindred spirits!!  “Rainbow Fish”, which is a more recent favorite, is an inspiring story or sharing and beautiful imagery.

So I set out to create wall pieces representative of these books in such a way that others would “know the book by the look”. Long story short I found I’m not a duplicator! It was more tedious than enjoyable to try and duplicate an already established image. Lesson learned …spontaneous inspirations from ideas is more my speed. So these little fishy’s are not on going to be submitted to the gallery, but I will be donating my piece, “In Dr. Seuss’s Kitchen” which was something I made last month (before I knew about this event). They will auction it off at the event and hopefully raise some money for the gallery 😀

Dr. Seuss Ceramic Art
“In Dr. Seuss’s Kitchen”

Well that is it for this weeks Hobby Potter Weekly! Come back to see me next week!

Enjoy the Clay!

Tammy Jo